Acelerar Inicio

ROSA foro para hispanohablantes.
Ответить
Ghermain
Сообщения: 12
Зарегистрирован: 18 июн 2013, 15:04
Operating system: Rosa Desktop Fresh R1 64 bits laptop

Acelerar Inicio

Сообщение Ghermain » 18 июн 2013, 15:29

Buen dia para todos.
He instalado ROSA Fresh R1 64 bits en una laptop Samsung RV408 con 8 GB RAM pero demora mas de un minuto en iniciar y llegar al escritorio. Ya he desactivado varias aplicaciones de inicio que no uso pero sigue lento el arranque en comparación con Pear Linux 7 y Kubuntu 13.04 que he probado en la misma máquina, incluso W7 que está en otra partición inicia en 40 segundos.
¿Que puedo hacer para que me inicie rápido?
Disculpen no hablo inglés ni ruso, puse este mismo tema en: http://fororosalinux.com/Thread-Acelerar-Inicio

Аватара пользователя
ДроноваЮ
Сообщения: 2636
Зарегистрирован: 01 июн 2011, 13:11
Operating system: Ubuntu/ROSA
Откуда: Москва

Re: Acelerar Inicio

Сообщение ДроноваЮ » 18 июн 2013, 16:06

Hola Ghermain,
Por favor haga lo siguiente:

Код: Выделить всё

urpmi systemd-tools
(o instala desde el rpmdrake)
después:

Код: Выделить всё

systemd-analyze blame
y muéstralo aquí

Ghermain
Сообщения: 12
Зарегистрирован: 18 июн 2013, 15:04
Operating system: Rosa Desktop Fresh R1 64 bits laptop

Re: Acelerar Inicio

Сообщение Ghermain » 18 июн 2013, 16:50

Copio lo que me arrojó la terminal:

Код: Выделить всё

8483ms laptop-mode.service
  4364ms NetworkManager.service
  3745ms preload.service
  3668ms bluetooth.service
  3424ms named.service
  2422ms wpa_supplicant.service
  2314ms systemd-logind.service
  2287ms mandi.service
  2253ms systemd-udev-settle.service
  2215ms avahi-daemon.service
  2116ms resolvconf.service
  2103ms network.service
  2019ms udisksd.service
  2013ms partmon.service
  2013ms lm_sensors.service
  1929ms polkit.service
  1669ms microcode_ctl.service
  1649ms apmd.service
  1626ms fedora-storage-init.service
  1556ms fedora-readonly.service
  1549ms mandriva-everytime.service
  1516ms virtualbox.service
  1486ms checkflashboot.service
  1437ms mdmonitor.service
  1289ms cpupower.service
   923ms systemd-remount-fs.service
   686ms systemd-modules-load.service
   589ms systemd-sysctl.service
   584ms acpid.service
   569ms systemd-vconsole-setup.service
   496ms systemd-udev-trigger.service
   459ms systemd-user-sessions.service
   426ms fedora-storage-init-late.service
   356ms mandriva-kmsg-loglevel.service
   260ms sys-kernel-debug.mount
   248ms autofs.service
   230ms dev-mqueue.mount
   213ms mandriva-save-dmesg.service
   209ms systemd-tmpfiles-setup.service
   207ms rpcbind.service
   203ms mandriva-boot-links.service
   184ms systemd-udevd.service
   110ms dev-hugepages.mount
   109ms fedora-wait-storage.service
   106ms nscd.service
    73ms rc-local.service
    34ms home.mount
    26ms tmp.mount
    12ms upower.service
     6ms rtkit-daemon.service
     4ms proc-sys-fs-binfmt_misc.mount
     2ms sys-fs-fuse-connections.mount

Аватара пользователя
ДроноваЮ
Сообщения: 2636
Зарегистрирован: 01 июн 2011, 13:11
Operating system: Ubuntu/ROSA
Откуда: Москва

Re: Acelerar Inicio

Сообщение ДроноваЮ » 18 июн 2013, 17:03

y

Код: Выделить всё

/var/log/dmesg

Ghermain
Сообщения: 12
Зарегистрирован: 18 июн 2013, 15:04
Operating system: Rosa Desktop Fresh R1 64 bits laptop

Re: Acelerar Inicio

Сообщение Ghermain » 24 июн 2013, 17:39

Este comando ni aún siendo root me lo deja ejecutar:

/var/log/dmesg

Instalé ROSA Fresh R1 64 en otra laptop y el problema de la demora al arrancar persiste comparado con Pear 7 y Mint KDE 14 que inician a los 40 y 45 segundos, ROSA minuto 20 segundos, además he notado lentitud en los navegadores en especial Opera que ya no abre las páginas.
:evil:

Аватара пользователя
René López
Сообщения: 25
Зарегистрирован: 05 мар 2014, 06:34
Operating system: Rosa Fresh R2 Gnome/Shell

Re: Acelerar Inicio

Сообщение René López » 05 мар 2014, 07:01

Hola.. :oops:
Aprovecho el tópico abierto para comentar que también lo siento lento de vez en cuando a Rosa, destaco que estoy usando la versión Rosa Fresh R2 Gnome/Shell 3.8.4

Agrego aquí lo que me arroja la terminal al intentar instalar el systemd-tools:

Код: Выделить всё

El paquete glibc-2.15-8-rosa2012.1.x86_64 ya está instalado
No se puede instalar el paquete pedido:
systemd-194-10-rosa2012.1.x86_64 (para mantener systemd-208-26-rosa2012.1.x86_64)
Al intentar ejecutar el systemd-analyze blame:

Код: Выделить всё

bash: systemd-analyze: no se encontró la orden
Y al poner /var/log/dmesg me dice que no tengo permiso, ni como Root, entonces fui de esta forma: cd /var/log luego, desde ahí si se ejecutó el dmesg, lanzando esto:

Код: Выделить всё

[lopez@DRAKARYS log]$ dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.27-nrj-desktop-1rosa (mockbuild@rosa2012.1-base) (gcc version 4.7.3 20121001 (ROSA) (Linaro GCC 4.7-2012.10) ) #1 SMP PREEMPT Thu Jan 16 12:30:00 UTC 2014
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.27-nrj-desktop-1rosa root=UUID=577c313a-9876-4778-8c24-6966afe1e670 ro acpi_backlight=vendor splash=silent logo.nologo resume= init=/lib/systemd/systemd
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000a0daffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a0db0000-0x00000000a21affff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a21b0000-0x00000000a6abefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a6abf000-0x00000000a6ebefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a6ebf000-0x00000000a6fbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a6fbf000-0x00000000a6ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000a6fff000-0x00000000a6ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a7000000-0x00000000af9fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffc80000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Acer Aspire E1-531/EA50_HC_CR, BIOS V2.15 03/11/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] No AGP bridge found
[    0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-E7FFF write-protect
[    0.000000]   E8000-EFFFF write-combining
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 0A0000000 mask FFC000000 write-back
[    0.000000]   3 base 0A4000000 mask FFE000000 write-back
[    0.000000]   4 base 0A6000000 mask FFF000000 write-back
[    0.000000]   5 base 0FFC00000 mask FFFC00000 write-protect
[    0.000000]   6 base 100000000 mask F80000000 write-back
[    0.000000]   7 base 14F600000 mask FFFE00000 uncachable
[    0.000000]   8 base 14F800000 mask FFF800000 uncachable
[    0.000000]   9 base 150000000 mask FF0000000 uncachable
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820: last_pfn = 0xa7000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01eeb000, 0x01eebfff] PGTABLE
[    0.000000] BRK [0x01eec000, 0x01eecfff] PGTABLE
[    0.000000] BRK [0x01eed000, 0x01eedfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
[    0.000000]  [mem 0x14f400000-0x14f5fffff] page 2M
[    0.000000] BRK [0x01eee000, 0x01eeefff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
[    0.000000]  [mem 0x14c000000-0x14f3fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[    0.000000]  [mem 0x100000000-0x14bffffff] page 2M
[    0.000000] BRK [0x01eef000, 0x01eeffff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x1fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x20200000-0x40003fff]
[    0.000000]  [mem 0x20200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0x40003fff] page 4k
[    0.000000] BRK [0x01ef0000, 0x01ef0fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x40005000-0xa0daffff]
[    0.000000]  [mem 0x40005000-0x401fffff] page 4k
[    0.000000]  [mem 0x40200000-0xa0bfffff] page 2M
[    0.000000]  [mem 0xa0c00000-0xa0daffff] page 4k
[    0.000000] init_memory_mapping: [mem 0xa21b0000-0xa6abefff]
[    0.000000]  [mem 0xa21b0000-0xa21fffff] page 4k
[    0.000000]  [mem 0xa2200000-0xa69fffff] page 2M
[    0.000000]  [mem 0xa6a00000-0xa6abefff] page 4k
[    0.000000] init_memory_mapping: [mem 0xa6fff000-0xa6ffffff]
[    0.000000]  [mem 0xa6fff000-0xa6ffffff] page 4k
[    0.000000] RAMDISK: [mem 0x3778c000-0x37bbdfff]
[    0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 ACRSYS)
[    0.000000] ACPI: XSDT 00000000a6ffe210 0008C (v01 ACRSYS ACRPRDCT 00000001      01000013)
[    0.000000] ACPI: FACP 00000000a6ffb000 0010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DSDT 00000000a6fec000 0BB9E (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[    0.000000] ACPI: FACS 00000000a6fba000 00040
[    0.000000] ACPI: UEFI 00000000a6ffd000 00236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASF! 00000000a6ffc000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: HPET 00000000a6ffa000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: APIC 00000000a6ff9000 0008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: MCFG 00000000a6ff8000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 00000000a6feb000 006FE (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[    0.000000] ACPI: BOOT 00000000a6fe9000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: ASPT 00000000a6fe4000 00034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: DBGP 00000000a6fe3000 00034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: FPDT 00000000a6fe1000 00044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[    0.000000] ACPI: SSDT 00000000a6fdf000 0079A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: SSDT 00000000a6fde000 00A92 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
[    0.000000]   NODE_DATA [mem 0x14f5f6000-0x14f5f9fff]
[    0.000000]  [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ae00000-ffff88014ebfffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x14f5fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009cfff]
[    0.000000]   node   0: [mem 0x00100000-0x1fffffff]
[    0.000000]   node   0: [mem 0x20200000-0x40003fff]
[    0.000000]   node   0: [mem 0x40005000-0xa0daffff]
[    0.000000]   node   0: [mem 0xa21b0000-0xa6abefff]
[    0.000000]   node   0: [mem 0xa6fff000-0xa6ffffff]
[    0.000000]   node   0: [mem 0x100000000-0x14f5fffff]
[    0.000000] On node 0 totalpages: 1002075
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 10515 pages used for memmap
[    0.000000]   DMA32 zone: 672959 pages, LIFO batch:31
[    0.000000]   Normal zone: 5080 pages used for memmap
[    0.000000]   Normal zone: 325120 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[    0.000000] PM: Registered nosave memory: 00000000a0db0000 - 00000000a21b0000
[    0.000000] PM: Registered nosave memory: 00000000a6abf000 - 00000000a6ebf000
[    0.000000] PM: Registered nosave memory: 00000000a6ebf000 - 00000000a6fbf000
[    0.000000] PM: Registered nosave memory: 00000000a6fbf000 - 00000000a6fff000
[    0.000000] PM: Registered nosave memory: 00000000a7000000 - 00000000afa00000
[    0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[    0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000
[    0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[    0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc80000
[    0.000000] PM: Registered nosave memory: 00000000ffc80000 - 0000000100000000
[    0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88014f200000 s85376 r8192 d21120 u262144
[    0.000000] pcpu-alloc: s85376 r8192 d21120 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 986395
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.27-nrj-desktop-1rosa root=UUID=577c313a-9876-4778-8c24-6966afe1e670 ro acpi_backlight=vendor splash=silent logo.nologo resume= init=/lib/systemd/systemd
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3857892k/5494784k available (6277k kernel code, 1486484k absent, 150408k reserved, 6846k data, 1212k init)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] NR_IRQS:4352 nr_irqs:744 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.001000] tsc: Detected 1895.702 MHz processor
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3791.40 BogoMIPS (lpj=1895702)
[    0.000011] pid_max: default: 32768 minimum: 301
[    0.000038] Security Framework initialized
[    0.000049] TOMOYO Linux initialized
[    0.000356] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001680] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002274] Mount-cache hash table entries: 256
[    0.002470] Initializing cgroup subsys devices
[    0.002476] Initializing cgroup subsys freezer
[    0.002480] Initializing cgroup subsys net_cls
[    0.002484] Initializing cgroup subsys blkio
[    0.002488] Initializing cgroup subsys bfqio
[    0.002516] CPU: Physical Processor ID: 0
[    0.002520] CPU: Processor Core ID: 0
[    0.002527] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002538] mce: CPU supports 7 MCE banks
[    0.002553] CPU0: Thermal monitoring enabled (TM1)
[    0.002566] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 1
[    0.002725] Freeing SMP alternatives: 20k freed
[    0.003856] ACPI: Core revision 20130328
[    0.010187] ACPI: All ACPI Tables successfully acquired
[    0.028355] ftrace: allocating 22862 entries in 90 pages
[    0.042057] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.052062] smpboot: CPU0: Intel(R) Celeron(R) CPU 1005M @ 1.90GHz (fam: 06, model: 3a, stepping: 09)
[    0.052078] TSC deadline timer enabled
[    0.052091] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
[    0.052103] ... version:                3
[    0.052106] ... bit width:              48
[    0.052108] ... generic registers:      8
[    0.052111] ... value mask:             0000ffffffffffff
[    0.052114] ... max period:             000000007fffffff
[    0.052117] ... fixed-purpose events:   3
[    0.052120] ... event mask:             00000007000000ff
[    0.061176] smpboot: Booting Node   0, Processors  #1
[    0.074428] Brought up 2 CPUs
[    0.074435] smpboot: Total of 2 processors activated (7582.80 BogoMIPS)
[    0.075930] devtmpfs: initialized
[    0.076906] PM: Registering ACPI NVS region [mem 0xa6ebf000-0xa6fbefff] (1048576 bytes)
[    0.077794] xor: measuring software checksum speed
[    0.087732]    prefetch64-sse:  9936.000 MB/sec
[    0.097740]    generic_sse:  9136.000 MB/sec
[    0.097743] xor: using function: prefetch64-sse (9936.000 MB/sec)
[    0.097773] RTC time: 22:59:25, date: 03/04/14
[    0.097824] NET: Registered protocol family 16
[    0.097969] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.097975] ACPI: bus type PCI registered
[    0.098047] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.098054] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.105853] PCI: Using configuration type 1 for base access
[    0.106449] bio: create slab <bio-0> at 0
[    0.122764] raid6: sse2x1    4378 MB/s
[    0.139784] raid6: sse2x2    6437 MB/s
[    0.156796] raid6: sse2x4    7468 MB/s
[    0.156800] raid6: using algorithm sse2x4 (7468 MB/s)
[    0.156803] raid6: using ssse3x2 recovery algorithm
[    0.156844] ACPI: Added _OSI(Module Device)
[    0.156848] ACPI: Added _OSI(Processor Device)
[    0.156851] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.156854] ACPI: Added _OSI(Processor Aggregator Device)
[    0.158441] ACPI: EC: Look up EC in DSDT
[    0.160045] ACPI: Executed 1 blocks of module-level executable AML code
[    0.165926] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.166351] ACPI: SSDT 00000000a6e27018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20120913)
[    0.166763] ACPI: Dynamic OEM Table Load:
[    0.166767] ACPI: SSDT           (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20120913)
[    0.169109] ACPI: SSDT 00000000a6e28a98 00303 (v01  PmRef    ApIst 00003000 INTL 20120913)
[    0.169552] ACPI: Dynamic OEM Table Load:
[    0.169556] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20120913)
[    0.171907] ACPI: SSDT 00000000a6e26d98 00119 (v01  PmRef    ApCst 00003000 INTL 20120913)
[    0.172309] ACPI: Dynamic OEM Table Load:
[    0.172313] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20120913)
[    0.175218] ACPI: Interpreter enabled
[    0.175227] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568)
[    0.175237] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568)
[    0.175257] ACPI: (supports S0 S3 S4 S5)
[    0.175261] ACPI: Using IOAPIC for interrupt routing
[    0.175293] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.175425] ACPI: No dock devices found.
[    0.362718] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.362799] \_SB_.PCI0:_OSC invalid UUID
[    0.362800] _OSC request data:1 8 0 
[    0.363407] PCI host bridge to bus 0000:00
[    0.363413] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.363418] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.363422] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.363427] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.363431] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
[    0.363443] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.363545] pci 0000:00:02.0: [8086:0156] type 00 class 0x030000
[    0.363558] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]
[    0.363565] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.363570] pci 0000:00:02.0: reg 20: [io  0x2000-0x203f]
[    0.363687] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.363713] pci 0000:00:16.0: reg 10: [mem 0xc0604000-0xc060400f 64bit]
[    0.363797] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.363894] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.363918] pci 0000:00:1a.0: reg 10: [mem 0xc0609000-0xc06093ff]
[    0.364017] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.364092] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.364138] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.364156] pci 0000:00:1b.0: reg 10: [mem 0xc0600000-0xc0603fff 64bit]
[    0.364233] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.364286] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.364330] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.364461] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.364525] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.364567] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.364698] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.364760] pci 0000:00:1c.1: System wakeup disabled by ACPI
[    0.364810] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.364834] pci 0000:00:1d.0: reg 10: [mem 0xc0608000-0xc06083ff]
[    0.364933] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.365001] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.365049] pci 0000:00:1f.0: [8086:1e5e] type 00 class 0x060100
[    0.365242] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.365264] pci 0000:00:1f.2: reg 10: [io  0x2088-0x208f]
[    0.365273] pci 0000:00:1f.2: reg 14: [io  0x2094-0x2097]
[    0.365282] pci 0000:00:1f.2: reg 18: [io  0x2080-0x2087]
[    0.365291] pci 0000:00:1f.2: reg 1c: [io  0x2090-0x2093]
[    0.365301] pci 0000:00:1f.2: reg 20: [io  0x2060-0x207f]
[    0.365310] pci 0000:00:1f.2: reg 24: [mem 0xc0607000-0xc06077ff]
[    0.365361] pci 0000:00:1f.2: PME# supported from D3hot
[    0.365439] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[    0.365457] pci 0000:00:1f.3: reg 10: [mem 0xc0605000-0xc06050ff 64bit]
[    0.365480] pci 0000:00:1f.3: reg 20: [io  0x2040-0x205f]
[    0.365717] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
[    0.365757] pci 0000:02:00.0: reg 10: [mem 0xc0430000-0xc043ffff 64bit pref]
[    0.365788] pci 0000:02:00.0: reg 18: [mem 0xc0440000-0xc044ffff 64bit pref]
[    0.365845] pci 0000:02:00.0: reg 30: [mem 0xfffff800-0xffffffff pref]
[    0.365957] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.366010] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.366102] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
[    0.366140] pci 0000:02:00.1: reg 10: [mem 0xc0400000-0xc040ffff 64bit pref]
[    0.366334] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[    0.366458] pci 0000:02:00.2: [14e4:16be] type 00 class 0x088000
[    0.366496] pci 0000:02:00.2: reg 10: [mem 0xc0410000-0xc041ffff 64bit pref]
[    0.366692] pci 0000:02:00.2: PME# supported from D0 D3hot D3cold
[    0.366813] pci 0000:02:00.3: [14e4:16bf] type 00 class 0x088000
[    0.366852] pci 0000:02:00.3: reg 10: [mem 0xc0420000-0xc042ffff 64bit pref]
[    0.367047] pci 0000:02:00.3: PME# supported from D0 D3hot D3cold
[    0.370203] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.370222] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.370352] pci 0000:03:00.0: [168c:0032] type 00 class 0x028000
[    0.370402] pci 0000:03:00.0: reg 10: [mem 0xc0500000-0xc057ffff 64bit]
[    0.370518] pci 0000:03:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
[    0.370648] pci 0000:03:00.0: supports D1 D2
[    0.370650] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.370699] pci 0000:03:00.0: System wakeup disabled by ACPI
[    0.373130] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.373144] pci 0000:00:1c.1:   bridge window [mem 0xc0500000-0xc05fffff]
[    0.373232] \_SB_.PCI0:_OSC invalid UUID
[    0.373233] _OSC request data:1 1f 0 
[    0.373237] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.373243] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.434508] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.434583] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.434653] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.434722] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.434792] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.434862] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    0.434932] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    0.435000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    0.435265] ACPI: Enabled 6 GPEs in block 00 to 3F
[    0.435275] acpi root: \_SB_.PCI0 notify handler is installed
[    0.435338] Found 1 acpi root devices
[    0.435373] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.435502] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.435510] vgaarb: loaded
[    0.435513] vgaarb: bridge control possible 0000:00:02.0
[    0.435582] SCSI subsystem initialized
[    0.435586] ACPI: bus type ATA registered
[    0.435626] libata version 3.00 loaded.
[    0.435706] PCI: Using ACPI for IRQ routing
[    0.437446] PCI: pci_cache_line_size set to 64 bytes
[    0.437582] e820: reserve RAM buffer [mem 0x0009d400-0x0009ffff]
[    0.437584] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[    0.437586] e820: reserve RAM buffer [mem 0xa0db0000-0xa3ffffff]
[    0.437587] e820: reserve RAM buffer [mem 0xa6abf000-0xa7ffffff]
[    0.437589] e820: reserve RAM buffer [mem 0xa7000000-0xa7ffffff]
[    0.437591] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
[    0.437674] NetLabel: Initializing
[    0.437677] NetLabel:  domain hash size = 128
[    0.437680] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.437692] NetLabel:  unlabeled traffic allowed by default
[    0.437732] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.437741] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.439761] Switching to clocksource hpet
[    0.444454] pnp: PnP ACPI init
[    0.444470] ACPI: bus type PNP registered
[    0.444564] pnp 00:00: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[    0.444629] pnp 00:01: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active)
[    0.444694] pnp 00:02: [dma 4]
[    0.444711] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.444729] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    0.444837] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.444866] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.444909] system 00:06: [io  0x0680-0x069f] has been reserved
[    0.444915] system 00:06: [io  0xfd60-0xfd63] has been reserved
[    0.444919] system 00:06: [io  0x1000-0x100f] has been reserved
[    0.444923] system 00:06: [io  0xffff] has been reserved
[    0.444927] system 00:06: [io  0xffff] has been reserved
[    0.444932] system 00:06: [io  0x0400-0x0453] has been reserved
[    0.444936] system 00:06: [io  0x0458-0x047f] has been reserved
[    0.444940] system 00:06: [io  0x0500-0x057f] has been reserved
[    0.444945] system 00:06: [io  0x164e-0x164f] has been reserved
[    0.444950] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.444979] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.445026] system 00:08: [io  0x0454-0x0457] has been reserved
[    0.445032] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.504939] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.504945] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.504950] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.504954] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.504959] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.504964] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.504968] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.504973] system 00:09: [mem 0xff000000-0xff000fff] has been reserved
[    0.504978] system 00:09: [mem 0xff010000-0xffffffff] could not be reserved
[    0.504983] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.504987] system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
[    0.504993] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.505257] system 00:0a: [mem 0x20000000-0x201fffff] has been reserved
[    0.505263] system 00:0a: [mem 0x40004000-0x40004fff] has been reserved
[    0.505268] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.505286] pnp: PnP ACPI: found 11 devices
[    0.505290] ACPI: bus type PNP unregistered
[    0.511839] pci 0000:02:00.0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
[    0.511847] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[    0.511885] pci 0000:00:1c.0: BAR 14: assigned [mem 0xafb00000-0xafbfffff]
[    0.511892] pci 0000:00:1c.1: BAR 15: assigned [mem 0xafc00000-0xafcfffff pref]
[    0.511898] pci 0000:02:00.0: BAR 6: assigned [mem 0xc0450000-0xc04507ff pref]
[    0.511904] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.511917] pci 0000:00:1c.0:   bridge window [mem 0xafb00000-0xafbfffff]
[    0.511926] pci 0000:00:1c.0:   bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.511941] pci 0000:03:00.0: BAR 6: assigned [mem 0xafc00000-0xafc0ffff pref]
[    0.511945] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.511958] pci 0000:00:1c.1:   bridge window [mem 0xc0500000-0xc05fffff]
[    0.511966] pci 0000:00:1c.1:   bridge window [mem 0xafc00000-0xafcfffff pref]
[    0.512156] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.512158] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.512160] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.512162] pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
[    0.512165] pci_bus 0000:02: resource 1 [mem 0xafb00000-0xafbfffff]
[    0.512167] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
[    0.512169] pci_bus 0000:03: resource 1 [mem 0xc0500000-0xc05fffff]
[    0.512171] pci_bus 0000:03: resource 2 [mem 0xafc00000-0xafcfffff pref]
[    0.512205] NET: Registered protocol family 2
[    0.512380] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    0.512501] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.512583] TCP: Hash tables configured (established 32768 bind 32768)
[    0.512607] TCP: reno registered
[    0.512617] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.512636] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.512708] NET: Registered protocol family 1
[    0.512724] pci 0000:00:02.0: Boot video device
[    0.534921] PCI: CLS 64 bytes, default 64
[    0.534965] Trying to unpack rootfs image as initramfs...
[    1.117230] Freeing initrd memory: 4296k freed
[    1.117821] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.117828] software IO TLB [mem 0xa2abf000-0xa6abf000] (64MB) mapped at [ffff8800a2abf000-ffff8800a6abefff]
[    1.117867] Simple Boot Flag at 0x44 set to 0x1
[    1.118155] audit: initializing netlink socket (disabled)
[    1.118168] type=2000 audit(1393973966.092:1): initialized
[    1.141423] bounce pool size: 64 pages
[    1.141436] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.142730] VFS: Disk quotas dquot_6.5.2
[    1.142771] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.143188] bio: create slab <bio-1> at 1
[    1.143313] Btrfs loaded
[    1.143322] msgmni has been set to 7543
[    1.143619] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.143652] io scheduler noop registered
[    1.143656] io scheduler deadline registered
[    1.143684] io scheduler cfq registered
[    1.143709] io scheduler bfq registered (default)
[    1.143943] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    1.143947] vesafb: scrolling: redraw
[    1.143951] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.144347] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90004800000, using 3072k, total 3072k
[    1.209333] Console: switching to colour frame buffer device 128x48
[    1.275010] fb0: VESA VGA frame buffer device
[    1.275555] intel_idle: MWAIT substates: 0x120
[    1.275556] intel_idle: v0.4 model 0x3A
[    1.275558] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.275598] GHES: HEST is not enabled!
[    1.276101] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.277327] Linux agpgart interface v0.103
[    1.279094] brd: module loaded
[    1.279552] ahci 0000:00:1f.2: version 3.0
[    1.279690] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[    1.279721] ahci: SSS flag set, parallel bus scan disabled
[    1.290540] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x5 impl SATA mode
[    1.291529] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst 
[    1.292513] ahci 0000:00:1f.2: setting latency timer to 64
[    1.294744] scsi0 : ahci
[    1.295132] scsi1 : ahci
[    1.295514] scsi2 : ahci
[    1.295884] scsi3 : ahci
[    1.296228] ata1: SATA max UDMA/133 abar m2048@0xc0607000 port 0xc0607100 irq 40
[    1.297135] ata2: DUMMY
[    1.297436] ata3: SATA max UDMA/133 abar m2048@0xc0607000 port 0xc0607200 irq 40
[    1.298341] ata4: DUMMY
[    1.298731] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[    1.312393] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.313024] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.313738] mousedev: PS/2 mouse device common for all mice
[    1.314522] rtc_cmos 00:07: RTC can wake from S4
[    1.315219] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.315999] rtc_cmos 00:07: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.326052] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.365587] cpuidle: using governor ladder
[    1.390170] cpuidle: using governor menu
[    1.414343] ledtrig-cpu: registered to indicate activity on CPUs
[    1.438949] TCP: cubic registered
[    1.463192] Key type dns_resolver registered
[    1.487542] PM: Hibernation image not present or could not be loaded.
[    1.487553] registered taskstats version 1
[    1.512117]   Magic number: 6:59:1007
[    1.535868] system 00:09: hash matches
[    1.561616] rtc_cmos 00:07: setting system clock to 2014-03-04 22:59:26 UTC (1393973966)
[    1.585850] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    1.610342] EDD information not available.
[    1.634905] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.716230] ata1.00: ATA-8: TOSHIBA MQ01ABD050, AX003J, max UDMA/100
[    1.741601] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.770119] ata1.00: configured for UDMA/100
[    1.795655] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MQ01ABD0 AX00 PQ: 0 ANSI: 5
[    1.821733] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[    1.848171] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    1.874337] sd 0:0:0:0: [sda] Write Protect is off
[    1.900238] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.900258] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.035431]  sda: sda1 sda2 sda3
[    2.061959] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.119283] tsc: Refined TSC clocksource calibration: 1895.698 MHz
[    2.127267] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.171601] ata3.00: ATAPI: HL-DT-ST DVDRAM GT90N, 1.00, max UDMA/133
[    2.172035] Switching to clocksource tsc
[    2.226767] ata3.00: configured for UDMA/133
[    2.261599] scsi 2:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT90N     1.00 PQ: 0 ANSI: 5
[    2.289813] Freeing unused kernel memory: 1212k freed
[    2.316663] Write protecting the kernel read-only data: 12288k
[    2.347887] Freeing unused kernel memory: 1904k freed
[    2.379074] Freeing unused kernel memory: 1196k freed
[    2.430693] dracut: dracut-EE 2012.1 Desktop dracut-027-
[    2.471008] systemd-udevd[117]: starting version 208
[    2.511005] [drm] Initialized drm 1.1.0 20060810
[    2.543974] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1
[    2.572203] ACPI: Power Button [PWRB]
[    2.600108] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0D:00/input/input2
[    2.629156] ACPI: Lid Switch [LID0]
[    2.657855] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input3
[    2.687630] ACPI: Sleep Button [SLPB]
[    2.716953] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    2.747371] ACPI: Power Button [PWRF]
[    2.781922] [drm] Memory usable by graphics device = 2048M
[    2.812335] checking generic (b0000000 300000) vs hw (b0000000 10000000)
[    2.812337] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    2.843475] Console: switching to colour dummy device 80x25
[    2.843566] i915 0000:00:02.0: setting latency timer to 64
[    2.878749] i915 0000:00:02.0: irq 41 for MSI/MSI-X
[    2.878760] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    2.878765] [drm] Driver supports precise vblank timestamp query.
[    2.878871] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.909001] [drm] failed to retrieve link info, disabling eDP
[    2.983552] fbcon: inteldrmfb (fb0) is primary device
[    3.018943] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f01)
[    3.042122] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x15, 0x0a.
[    3.152241] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5
[    3.641814] Console: switching to colour frame buffer device 170x48
[    3.644564] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.644592] i915 0000:00:02.0: registered panic notifier
[    3.645512] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    3.645693] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    3.645756] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    3.648412] dracut: Starting plymouth daemon
[    4.730747] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    5.271724] wmi: Mapper loaded
[    5.282390] ACPI: bus type USB registered
[    5.282420] usbcore: registered new interface driver usbfs
[    5.282432] usbcore: registered new interface driver hub
[    5.282466] usbcore: registered new device driver usb
[    5.282827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    5.282977] ehci-pci: EHCI PCI platform driver
[    5.283119] ehci-pci 0000:00:1a.0: setting latency timer to 64
[    5.283130] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    5.283136] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    5.283155] ehci-pci 0000:00:1a.0: debug port 2
[    5.287049] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    5.287072] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0609000
[    5.292422] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    5.292447] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.292450] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.292452] usb usb1: Product: EHCI Host Controller
[    5.292454] usb usb1: Manufacturer: Linux 3.10.27-nrj-desktop-1rosa ehci_hcd
[    5.292456] usb usb1: SerialNumber: 0000:00:1a.0
[    5.292567] hub 1-0:1.0: USB hub found
[    5.292572] hub 1-0:1.0: 2 ports detected
[    5.292715] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    5.292719] cdrom: Uniform CD-ROM driver Revision: 3.20
[    5.292841] sr 2:0:0:0: Attached scsi CD-ROM sr0
[    5.293947] ehci-pci 0000:00:1d.0: setting latency timer to 64
[    5.293958] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    5.294091] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    5.294111] ehci-pci 0000:00:1d.0: debug port 2
[    5.298000] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    5.298024] ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0608000
[    5.303280] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    5.303306] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    5.303309] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.303311] usb usb2: Product: EHCI Host Controller
[    5.303313] usb usb2: Manufacturer: Linux 3.10.27-nrj-desktop-1rosa ehci_hcd
[    5.303315] usb usb2: SerialNumber: 0000:00:1d.0
[    5.303429] hub 2-0:1.0: USB hub found
[    5.303434] hub 2-0:1.0: 2 ports detected
[    5.594163] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    5.708494] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    5.708499] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.708784] hub 1-1:1.0: USB hub found
[    5.708872] hub 1-1:1.0: 4 ports detected
[    5.811100] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    5.866670] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    5.925431] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    5.925435] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    5.925700] hub 2-1:1.0: USB hub found
[    5.925800] hub 2-1:1.0: 4 ports detected
[    5.957896] dracut: Checking ext4: /dev/disk/by-uuid/577c313a-9876-4778-8c24-6966afe1e670
[    5.957946] dracut: issuing e2fsck -a  /dev/disk/by-uuid/577c313a-9876-4778-8c24-6966afe1e670
[    5.999170] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[    6.061797] dracut: Rosa_Fresh_Gnome: Superblock last mount time is in the future.
[    6.061852] dracut: (by less than a day, probably due to the hardware clock being incorrectly set) FIXED.
[    6.061893] dracut: Rosa_Fresh_Gnome: Superblock last write time is in the future.
[    6.061940] dracut: (by less than a day, probably due to the hardware clock being incorrectly set). FIXED.
[    6.061981] dracut: Rosa_Fresh_Gnome: clean, 213654/2621440 files, 5793600/10485760 blocks
[    6.063327] dracut: Mounting /dev/disk/by-uuid/577c313a-9876-4778-8c24-6966afe1e670 with -o defaults,ro
[    6.100072] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    6.138876] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b374
[    6.138891] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.138893] usb 1-1.3: Product: HD WebCam
[    6.138895] usb 1-1.3: Manufacturer: SunplusIT INC.
[    6.179730] dracut: Mounted root filesystem /dev/sda3
[    6.281077] usb 2-1.1: new high-speed USB device number 3 using ehci-pci
[    6.367521] usb 2-1.1: New USB device found, idVendor=12d1, idProduct=1c05
[    6.367528] usb 2-1.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[    6.367533] usb 2-1.1: Product: HUAWEI Mobile
[    6.367545] usb 2-1.1: Manufacturer: HUAWEI
[    6.423039] dracut: Switching root
[    6.917915] systemd[1]: RTC configured in localtime, applying delta of -180 minutes to system time.
[    6.978272] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[    7.156347] systemd[1]: Inserted module 'autofs4'
[    7.204848] NET: Registered protocol family 10
[    7.205033] systemd[1]: Inserted module 'ipv6'
[    7.217897] systemd[1]: Set hostname to <DRAKARYS>.
[    7.592348] RUN systemd EFI generator
[    7.592883] Stop write mount to EFI
[    8.021656] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    8.021733] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.021747] systemd[1]: Starting Login Prompts.
[    8.021805] systemd[1]: Reached target Login Prompts.
[    8.021816] systemd[1]: Starting RPC Port Mapper.
[    8.021853] systemd[1]: Reached target RPC Port Mapper.
[    8.021864] systemd[1]: Starting Syslog Socket.
[    8.021931] systemd[1]: Listening on Syslog Socket.
[    8.021945] systemd[1]: Starting Delayed Shutdown Socket.
[    8.021995] systemd[1]: Listening on Delayed Shutdown Socket.
[    8.022006] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    8.022054] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.022071] systemd[1]: Starting Journal Socket.
[    8.022136] systemd[1]: Listening on Journal Socket.
[    8.036482] systemd[1]: Starting Load legacy module configuration...
[    8.051968] systemd[1]: Starting Load Kernel Modules...
[    8.052401] systemd[1]: Mounting Huge Pages File System...
[    8.052869] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.053280] systemd[1]: Starting Set default kernel console loglevel...
[    8.062167] systemd[1]: Starting Journal Service...
[    8.062721] systemd[1]: Started Journal Service.
[    8.993109] systemd-journald[269]: Vacuuming done, freed 0 bytes
[    9.175051] EXT4-fs (sda3): re-mounted. Opts: (null)
[    9.608568] systemd-udevd[315]: starting version 208
[   10.100921] vboxguest: PCI device not found, probably running on physical hardware.
[   10.434502] device-mapper: uevent: version 1.0.3
[   10.434671] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[   10.977372] ACPI: Requesting acpi_cpufreq
[   11.091213] systemd-journald[269]: Received request to flush runtime journal from PID 1
[   11.226675] mei_me 0000:00:16.0: setting latency timer to 64
[   11.226721] mei_me 0000:00:16.0: irq 42 for MSI/MSI-X
[   11.241054] ACPI Warning: 0x0000000000002040-0x000000000000205f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20130328/utaddress-251)
[   11.241063] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.398415] ACPI: AC Adapter [ACAD] (off-line)
[   11.478507] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.481690] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.709310] ACPI: Battery Slot [BAT1] (battery present)
[   11.957799] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251)
[   11.957807] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.957814] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   11.957818] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.957819] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251)
[   11.957822] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   11.957824] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   12.131345] cfg80211: Calling CRDA to update world regulatory domain
[   12.158152] sdhci: Secure Digital Host Controller Interface driver
[   12.158156] sdhci: Copyright(c) Pierre Ossman
[   12.162289] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[   12.165945] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
[   12.273652] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[   12.505849] ath: phy0: timeout (1000 us) on reg 0x15f18: 0x00000000 & 0x00000007 != 0x00000004
[   12.511082] ath: phy0: ASPM enabled: 0x43
[   12.511087] ath: EEPROM regdomain: 0x6c
[   12.511088] ath: EEPROM indicates we should expect a direct regpair map
[   12.511090] ath: Country alpha2 being used: 00
[   12.511092] ath: Regpair used: 0x6c
[   12.658697] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.658907] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90004800000, irq=17
[   12.747703] lib80211: common routines for IEEE802.11 drivers
[   12.747707] lib80211_crypt: registered algorithm 'NULL'
[   12.944000] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x17
[   12.944787] microcode: CPU0 updated to revision 0x19, date = 2013-06-13
[   12.944800] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[   12.944847] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x17
[   12.945295] microcode: CPU1 updated to revision 0x19, date = 2013-06-13
[   12.945344] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   13.050304] usbcore: registered new interface driver usbserial
[   13.050317] usbcore: registered new interface driver usbserial_generic
[   13.050326] usbserial: USB Serial support registered for generic
[   13.148620] usbcore: registered new interface driver option
[   13.148640] usbserial: USB Serial support registered for GSM modem (1-port)
[   13.148709] option 2-1.1:1.0: GSM modem (1-port) converter detected
[   13.148810] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB0
[   13.148826] option 2-1.1:1.1: GSM modem (1-port) converter detected
[   13.148866] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB1
[   13.148876] option 2-1.1:1.2: GSM modem (1-port) converter detected
[   13.148915] usb 2-1.1: GSM modem (1-port) converter now attached to ttyUSB2
[   13.257081] wl: module license 'MIXED/Proprietary' taints kernel.
[   13.257085] Disabling lock debugging due to kernel taint
[   13.312788] usb-storage 2-1.1:1.3: USB Mass Storage device detected
[   13.313346] scsi4 : usb-storage 2-1.1:1.3
[   13.313417] usb-storage 2-1.1:1.4: USB Mass Storage device detected
[   13.313448] scsi5 : usb-storage 2-1.1:1.4
[   13.313497] usbcore: registered new interface driver usb-storage
[   13.609042] media: Linux media interface: v0.10
[   13.637097] Linux video capture interface: v2.00
[   13.667628] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b374)
[   13.676991] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input7
[   13.677666] usbcore: registered new interface driver uvcvideo
[   13.677668] USB Video Class driver (1.1.1)
[   13.706203] acer_wmi: Acer Laptop ACPI-WMI Extras
[   13.706216] acer_wmi: Function bitmap for Communication Button: 0x1
[   13.706220] acer_wmi: Disabling ACPI video driver
[   13.734667] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[   13.735044] input: Acer WMI hotkeys as /devices/virtual/input/input8
[   13.736664] input: Acer BMA150 accelerometer as /devices/virtual/input/input9
[   13.821014] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   13.841613] hda_codec: ALC269VB: SKU not ready 0x598301f0
[   13.842170] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   13.842172]    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   13.842174]    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[   13.842175]    mono: mono_out=0x0
[   13.842176]    inputs:
[   13.842178]      Internal Mic=0x1b
[   13.842179]      Mic=0x18
[   13.842181] realtek: No valid SSID, checking pincfg 0x598301f0 for NID 0x1d
[   13.842182] realtek: Enable default setup for auto mode as fallback
[   13.844216] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   13.860921] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   13.861000] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   13.861055] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   13.970035] iTCO_vendor_support: vendor-support=0
[   13.970991] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   13.971022] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[   13.971110] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[   14.092305] pps_core: LinuxPPS API ver. 1 registered
[   14.092309] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   14.093545] PTP clock support registered
[   14.118276] tg3.c:v3.132 (May 21, 2013)
[   14.139386] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:89:84:c7:f6:fc
[   14.139391] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   14.139394] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   14.139396] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[   14.316201] scsi 4:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   14.318462] scsi 5:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[   14.321570] sr1: scsi-1 drive
[   14.321678] sr 4:0:0:0: Attached scsi CD-ROM sr1
[   14.323332] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[   18.392792] cfg80211: World regulatory domain updated:
[   18.392796] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   18.392798] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.392800] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.392802] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   18.392803] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   18.392805] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   21.646894] tg3 0000:02:00.0: irq 44 for MSI/MSI-X
[   21.646902] tg3 0000:02:00.0: irq 45 for MSI/MSI-X
[   21.646907] tg3 0000:02:00.0: irq 46 for MSI/MSI-X
[   22.211928] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   22.338823] Bluetooth: Core ver 2.16
[   22.338847] NET: Registered protocol family 31
[   22.338849] Bluetooth: HCI device and connection manager initialized
[   22.338857] Bluetooth: HCI socket layer initialized
[   22.339286] Bluetooth: L2CAP socket layer initialized
[   22.339296] Bluetooth: SCO socket layer initialized
[   22.421013] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.421017] Bluetooth: BNEP filters: protocol multicast
[   22.421025] Bluetooth: BNEP socket layer initialized
[   56.494889] systemd-journald[269]: File /var/log/journal/e2900fba71c3a6c2167e4b1052de9ffe/user-500.journal corrupted or uncleanly shut down, renaming and replacing.
[   58.663629] fuse init (API version 7.22)
[   72.558964] ISO 9660 Extensions: Microsoft Joliet Level 1
[   72.622766] ISOFS: changing to secondary root
[   91.204352] PPP generic driver version 2.4.2
[   91.240917] PPP BSD Compression module registered
[   91.243389] PPP Deflate Compression module registered
[  131.131750] usb 2-1.2: new high-speed USB device number 4 using ehci-pci
[  131.222856] usb 2-1.2: New USB device found, idVendor=0930, idProduct=6545
[  131.222864] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  131.222868] usb 2-1.2: Product: DT 100 G2       
[  131.222871] usb 2-1.2: Manufacturer: Kingston
[  131.222874] usb 2-1.2: SerialNumber: 001CC0C60DDAEAA1C42D005F
[  131.223287] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[  131.223371] scsi6 : usb-storage 2-1.2:1.0
[  132.260546] scsi 6:0:0:0: Direct-Access     Kingston DT 100 G2        PMAP PQ: 0 ANSI: 0 CCS
[  136.562177] sd 6:0:0:0: [sdc] 31252480 512-byte logical blocks: (16.0 GB/14.9 GiB)
[  136.562897] sd 6:0:0:0: [sdc] Write Protect is off
[  136.562900] sd 6:0:0:0: [sdc] Mode Sense: 23 00 00 00
[  136.563493] sd 6:0:0:0: [sdc] No Caching mode page found
[  136.563499] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[  136.569472] sd 6:0:0:0: [sdc] No Caching mode page found
[  136.569476] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[  136.596151]  sdc: sdc1
[  136.599595] sd 6:0:0:0: [sdc] No Caching mode page found
[  136.599601] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[  136.599613] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[  138.253213] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  207.448466] sdc: detected capacity change from 16001269760 to 0
[  210.288795] usb 2-1.2: USB disconnect, device number 4
[lopez@DRAKARYS log]$ 
¿Puede significar algo eso?
Desde ya, muchas gracias.
Simplemente amala.

Ответить

Вернуться в «ROSA-Español»