Rosa R9 KDE и PS3 eye - не работает микрофон

Ответить
LeonidVin
Сообщения: 3
Зарегистрирован: 30 май 2017, 20:42
Operating system: Rosa R9 KDE

Rosa R9 KDE и PS3 eye - не работает микрофон

Сообщение LeonidVin » 30 май 2017, 21:13

День добрый!
Помогите, пожалуйста, привести микрофон в рабочее состояние. При подключении камера PlayStation eye заработала как вебкамера прямо "из коробки", а звука нет

cat /proc/asound/cards
cat /proc/asound/cards
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf7efc000 irq 17
1 [CameraB409241 ]: USB-Audio - USB Camera-B4.09.24.1
OmniVision Technologies, Inc. USB Camera-B4.09.24.1 at usb-0000:00:1d.0-1.5, hi
в /etc/pulse/default.pa
строка load-module module-alsa-source device=hw:1,0 есть
#!/usr/bin/pulseaudio -nF
#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.

# This startup script is used only if PulseAudio is started per-user
# (i.e. not in system mode)

.fail

### Automatically restore the volume of streams and devices
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore

### Automatically augment property information from .desktop files
### stored in /usr/share/application
load-module module-augment-properties

### Should be after module-*-restore but before module-*-detect
load-module module-switch-on-port-available

### Load audio drivers statically
### (it's probably better to not load these drivers manually, but instead
### use module-udev-detect -- see below -- for doing this automatically)
#load-module module-alsa-sink
load-module module-alsa-source device=hw:1,0
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif

### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif

### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif

.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif

### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP receiver module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
#load-module module-rtp-send source=rtp.monitor

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif

### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink

### Honour intended role device property
load-module module-intended-roles

### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle

### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
load-module module-console-kit
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif

### Enable positioned event sounds
load-module module-position-event-sounds

### Cork music/video streams when a phone stream is active
#load-module module-role-cork

### Modules to allow autoloading of filters (such as echo cancellation)
### on demand. module-filter-heuristics tries to determine what filters
### make sense, and module-filter-apply does the heavy-lifting of
### loading modules and rerouting streams.
load-module module-filter-heuristics
load-module module-filter-apply

.ifexists module-dbus-protocol.so
load-module module-dbus-protocol
.endif

.ifexists module-equalizer-sink.so
load-module module-equalizer-sink
.endif

.ifexists module-device-manager.so
load-module module-device-manager
.endif

### Make some devices default
#set-default-sink output
#set-default-source input
alsamixer при попытке выбрать USB Camera-B4.09.24.1 вылетает с ошибкой: cannot load mixer controls: Недопустимый аргумент

в kmix устройства захвата звука есть
Изображение

klopio
Сообщения: 267
Зарегистрирован: 09 мар 2016, 02:19
Operating system: Rosa R10 Plasma
Откуда: Новозыбков, Россия

Re: Rosa R9 KDE и PS3 eye - не работает микрофон

Сообщение klopio » 30 май 2017, 22:33

А что у Вас показано в регуляторе громкости PulseAudio , порт микрофон подключен ?
Вложения
Screenshot_20170530_224610.png
Sony Vaio
Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz 4GiB

LeonidVin
Сообщения: 3
Зарегистрирован: 30 май 2017, 20:42
Operating system: Rosa R9 KDE

Re: Rosa R9 KDE и PS3 eye - не работает микрофон

Сообщение LeonidVin » 31 май 2017, 13:33

Там есть список устройств: sony eye со значком микрофона и sony multichannel со значком карты, картинку в первом сообщении прицепить не получилось, попробую вечером скрин с домашнего компьтера выложить

LeonidVin
Сообщения: 3
Зарегистрирован: 30 май 2017, 20:42
Operating system: Rosa R9 KDE

Re: Rosa R9 KDE и PS3 eye - не работает микрофон

Сообщение LeonidVin » 31 май 2017, 20:10

Звук появился после перезапуска snd-usb-audio:

rmmod snd-usb-audio
modprobe snd-usb-audio

как можно сделать чтобы микрофон работал без этого бубна?

keleg
Сообщения: 5507
Зарегистрирован: 15 сен 2011, 01:58

Re: Rosa R9 KDE и PS3 eye - не работает микрофон

Сообщение keleg » 05 июн 2017, 18:56

поиграть в конфигах пульсаудио с подключаемыми модулями?

Аватара пользователя
VictorR2007
Сообщения: 7251
Зарегистрирован: 12 сен 2011, 13:00
Operating system: ROSA 2023.1

Re: Rosa R9 KDE и PS3 eye - не работает микрофон

Сообщение VictorR2007 » 06 июн 2017, 04:10

LeonidVin писал(а):Звук появился после перезапуска snd-usb-audio:

rmmod snd-usb-audio
modprobe snd-usb-audio

как можно сделать чтобы микрофон работал без этого бубна?
Добавить эти команды в rc.local.
Файл rc.local можно сделать так.
http://forum.rosalab.ru/viewtopic.php?f ... cal#p84774

Ответить

Вернуться в «Обсуждение ROSA Fresh R9-R11.1 (платформа 2016.1)»